NTE Solder Wick is made from fine copper wire woven together with a no-clean flux formula added to it to increase absorption.
  • Removes up to four times more solder than the conventional wick and extracts solder much faster than wicks based on Type-R fluxes.
  • Residue left behind is halide free and non-conductive so it does not have to be cleaned off the board.
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.
  • Available with standard or anti-static bobbins.
Solder Wick
Description NTE Part No.
No-Clean Wick, #3 Green, Width .075" (1.9mm), Length 5 ft. SW01-5
No-Clean Wick, #3 Green, Width .075" (1.9mm), Length 10 ft. SW01-10
No-Clean Wick, #3 Green, Width .075" (1.9mm), Length 25 ft. SW01-25
No-Clean Wick, #3 Green, Width .075" (1.9mm), Length 50 ft. SW01-50
No-Clean Wick, #4 Blue, Width .098" (2.5mm), Length 5 ft. SW02-5
No-Clean Wick, #4 Blue, Width .098" (2.5mm), Length 10 ft. SW02-10
No-Clean Wick, #4 Blue, Width .098" (2.5mm), Length 25 ft. SW02-25
No-Clean Wick, #4 Blue, Width .098" (2.5mm), Length 50 ft. SW02-50
No-Clean Wick w/Anti-Static Bobbin, #3 Green, Width .075" (1.9mm), Length 5 ft. SW03-5
No-Clean Wick w/Anti-Static Bobbin, #3 Green, Width .075" (1.9mm), Length 10 ft. SW03-10
No-Clean Wick w/Anti-Static Bobbin, #3 Green, Width .075" (1.9mm), Length 25 ft. SW03-25
No-Clean Wick w/Anti-Static Bobbin, #3 Green, Width .075" (1.9mm), Length 50 ft. SW03-50
No-Clean Wick w/Anti-Static Bobbin, #4 Blue, Width .098" (2.5mm), Length 5 ft. SW04-5
No-Clean Wick w/Anti-Static Bobbin, #4 Blue, Width .098" (2.5mm), Length 10 ft. SW04-10
No-Clean Wick w/Anti-Static Bobbin, #4 Blue, Width .098" (2.5mm), Length 25 ft. SW04-25
No-Clean Wick w/Anti-Static Bobbin, #4 Blue, Width .098" (2.5mm), Length 50 ft. SW04-50
 
 Home Back